Fronway Enterprise Co.,Ltd
Fronway Enterprise Co.,Ltd--GREEN ENERGY,GREEN EARTH!
Add to Cart
Solar Lamp Controller Intergrated LED Constant Current Driver , the small smart regulator with reomte controller. The data can be set according to your demand.
Solar Lamp Controller Intergrated LED Constant Current Driver
Main Fetures:
l The running-parameters can be set via Infrared remote control
l 12V rechargeable battery support(only 12V,not support 24V)
l Three Timing adjustment
l Three-Stage LED Brightness Dimming:100%->50%->30%
(can be manual set)
l Output current can be adjusted
l The DAY-NIGHT switch-point can be adjusted ,range: 0-3..9V
l Overcharge and overdischarge protection for battery
l Reverse connection protection for solar panel
l Reverse connection protection for battery(but connect carefully)
l Load short-circuit protection (but connect carefully)
Technique parameters
| ITEM | 12V |
| Over-charge Protection | 15V |
| Over-charge voltage | 14.4V |
| Low voltage reconnect | 11.6V |
| Over-discharge voltage | 10.8V |
|
| |
| Max Solar Panel Power | <70wp |
| Max Charging Current | <5A |
| Max Solar Voltage | <25V |
|
|
|
| Max Constant Current Output | 【SM-4AN-0A7】:700mA 【SM-4AN-1A4】:1400mA |
|
|
|
| IR Frequency | 38Khz |
| IR BaudRate | 2400Bps |
| IR Distance | <1m (The distance is too near but not good) |
|
|
|
| battery charging control | PWM |
| Self Power consume | <5mA |
| Waterproof | IP65 |
The Fourth-Stage Dimming is core feature of SM-0A5.
In most case,We want more energy-saving at mid-night or late-night,because there are no one. The Controller provide Fourth-Stage light mode,every stage brightness of LED and timer can be set by IR Parameters Setting Device [SM-IR08]. Default the First-Stage brightness is 100%, Second-Stage brightness is 50%, Third-Stage brightness is 30%.Fourth-Stage brightness is 50%.By using Foruth-Stage Dimming you can reduce power consumption up to 50%!
Other note :The Fourth-Stage is Early-Morning Light .
Brightness(mA)
100%
50%
30% Timer(Hour)
First Second Thrid Fourth